
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With
Other Specifications
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20,000 Hz
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 530 - 1,710 kHz
Aerials
FM: Telescopic aerial
AM:
Recording system
Approx. 120 s (sec.) with Sony cassette
TYPE I (normal): 70 - 10,000 Hz
General
Speaker
Full range: 10 cm dia., 3.2 ohms, cone type (2) Outputs
Headphones jack (stereo minijack)
For 16 - 64 ohms impedance headphones Power output (excluding US model)
2.3W + 2.3 W (at 3.2 ohms, 10 % harmonic distortion)
Power requirements
For CD radio
9 V DC, 6 size D (R20) batteries For remote controller :
3 V DC, 2 size AA (R6) batteries Power consumption
AC 20 W
Battery life
For CD radio
FM recording
Sony R20P: approx. 13.5 h
Sony alkaline LR20: approx. 19 h
Tape playback
Sony R20P: approx. 7.5 h
Sony alkaline LR20: approx. 15 h
CD playback
Sony R20P: approx. 2.5 h
Sony alkaline LR20: approx. 6 h
Dimensions
Approx. 425 × 160 × 246 mm (w/h/d)
(16 3⁄4 × 6 3⁄8 × 9 3⁄4 inches) (incl. projecting parts) Mass
Approx. 4.2 kg (9 lb. 4 oz) (incl. batteries) Supplied accessory
AC power cord (1) Remote controller (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphone series
Additional Information | 25 |
|
|