Tips

•To exit the standby mode, press STANDBY to make the t indication disappear from the display.

•The preset settings remain until you reset them.

6 Set the volume by pressing TIME SET + or –, then

DISPLAY ENTER.

7 Press STANDBY.

The tindication lights up; the player enters the standby mode.

At the preset time, the power will go on, and the music will play. Then the power will go off at the preset time, and the player will enter into the standby mode.

To check/change the waking up timer settings

Press TIMER , then DISPLAY ENTER. Each time you press DISPLAY ENTER, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it.

To use the player before a timer playback starts

Just turn on the player, and then you can use it.

If you turn off the player before the preset time, timer playback will start at the preset time.

In case of the radio, however, if you listen to the station which is different from the one you tuned in in step 1 on page 20, you will hear that station at the preset time. Make sure to tune in the station you want to listen to before you turn off the player.

To stop play

Press POWER to turn off the power.

Timer The

The Timer 21