3W.E OUT (Write Enable pulse output) connector
(BNC type)
Outputs the WE pulse to communicate the timing to store the image on an external frame memory, etc.
For detailed information, read the instruction manual of the
4TRIG IN (trigger input) connector (BNC type) Connects to a commercially available slave unit in strobe mode by converting the connector of the slave unit into BNC type.
For detailed information, read the instruction manual of the
5HD (horizontal deflection) input/output connector (BNC type)
Inputs or outputs the HD signal. Input or output can be selected by setting the IN/OUT selector 7.
6VD/SYNC (vertical deflection/sync) input/output
connector (BNC type)
Inputs or outputs the vertical deflection signal or sync signal. Input or output can be selected by setting the IN/ OUT selector 7.
The type of sync signal is set on the SYSTEM menu of the video camera.
7IN/OUT (sync input/output) selector
Set to IN to use the HD connector 5 and VD/SYNC connector 6 as inputs, and to OUT to use them as outputs. Set to OUT when external sync is not used.
Using the HD and VD/SYNC connectors
The following shows how to use the HD and VD/SYNC connectors combined with the menu setting on the video camera and the IN/OUT selector on this unit.
| Menu | IN/OUT | Function of connector | ||
Purpose | setting on | selector | |||
|
| ||||
| camera | setting | HD | VD/SYNC | |
|
|
|
|
| |
To use HD and | Any | IN | HD signal | VD signal | |
VD signals for |
|
| input | input | |
external sync |
|
|
|
| |
|
|
|
|
| |
To use VBS | Any | IN | No signal | VBS signal | |
signal for |
|
| input | input | |
external sync |
|
|
|
| |
|
|
|
|
| |
To use HD and | Set SIGNAL | OUT | HD signal | VD signal | |
VD signals | to HD/VD. |
| output | output | |
output from the |
|
|
|
| |
camera |
|
|
|
| |
|
|
|
|
| |
To use SYNC | Set SIGNAL | OUT | No signal | SYNC | |
signal output | to C. SYNC. |
| output | signal | |
from the |
|
|
| output | |
camera |
|
|
|
| |
|
|
|
|
| |
8 (GB)