Recording from the radio (continued)

To stop recording

Press TAPE x.

Tips

If noise is heard while recording an AM radio program, move the AM loop antenna to reduce the noise or connect a ground wire to the U terminal (see page 71).

When you want to record on the reverse side, press TAPE nN to light up the left indicator in step 6.

When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

To record non-preset stations, press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display in step 3, then press TUNING + or – to tune in the desired station.

When you want to reduce the hiss noise in low- level, high-frequency signals, press DOLBY NR after step 5 so “ ;” appears in the display.

The CD PlayerPlaying CD tracks

repeatedly — Repeat Play

You can repeat a CD in normal play, Shuffle Play and Program Play.

REPEAT

,Press REPEAT during play until “REPEAT” or “REPEAT 1” appears.

REPEAT: For all the tracks on the CD.

REPEAT 1: For a single track only.

To cancel Repeat Play

Press REPEAT until “REPEAT” or “REPEAT 1” disappears.

22