Files cannot be played back.
•USB storage media formatted with file systems other than FAT16 or FAT32 are unsupported.*
•If you use partitioned USB storage media, only files on the first valid partition can be played.
•Files that are encrypted or protected by passwords, etc. cannot be played back.
*This system supports FAT16 and FAT32, but some USB storage media may not support all of these FAT. For details, see the operation manual of each USB storage media or contact the manufacturer.
TunerSevere hum or noise, or stations cannot be received. (“TUNED” or “STEREO” flashes on the display.)
•Connect the antenna properly.
•Find a location and an orientation that provide good reception, and then set up the antenna again.
•Keep the antennas away from the speaker cords, the power cord and the USB cable to avoid picking up noise.
•Connect a commercially available external antenna.
•Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand.
•Turn off nearby electrical equipment.
To change the AM tuning interval
The AM tuning interval is
Use buttons on the unit to change the AM tuning interval.
1Tune in any AM station, and then turn off the system.
2While holding down TUNER/BAND , press /.
All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure.
To improve tuner receptionTurn off CD player power by using the CD power management function. By default, CD power is turned on. You cannot change the setting in Power Saving Mode.
Use buttons on the unit to turn off CD player power.
1Press FUNCTION repeatedly to select the CD function, and then turn off the system.
2After “STANDBY” stops flashing, press /
while holding down .
“CD POWER OFF” appears. With CD player power turned off, disc access time is increased. To turn on CD player power, repeat the procedure until “CD POWER ON” appears.
Continued
Others
23GB