Installation

pStep 1: Connect the computer

With the computer switched off, connect the video signal cable to the display (VGA) connector on your computer. If your computer supports the DDC plug-and-play standard, this connection will enable DDC communication between the display and the computer.

The video signal cable is combined with audio and microphone cables. If your computer is equipped with sound capability, connect the audio (green) and microphone (red) plugs to appropriate jacks located on your computer.

 

2

 

AL

MONITOR

CONT

Blue (to monitor

LINE OUT LINE IN

MIC

connector)

 

 

Green (to LINE OUT connector)

Red (to microphone connector)

Fasten the screw of the blue plug.

Computer

✔Note on handling the video signal cable

Do not touch the pins of the video signal cable.

12 Getting Started