Sony CPD-E430 Specifications, If thin lines appear on the screen, Self-diagnosisfunction, (damper wires), Turn the monitor OFF and then ON

To display this monitor’s name, serial number, and date of manufacture.

While the monitor is receiving a
	INFORMATION
video signal, press and hold the	MODEL : CPD-E430
MENU button for more than
	SER NO : 1234567	W
5 seconds to display this	MANUFACTURED : 2001-30	R
		G
monitor’s information box.
		B

If thin lines appear on the screen

(damper wires)

These lines do not indicate a malfunction; they are a normal effect of the Trinitron picture tube with this monitor. These are shadows from the damper wires used to stabilize the aperture grille. The aperture grille is the essential element that makes a Trinitron picture tube unique by allowing more light to reach the screen, resulting in a brighter, more detailed picture.

Damper wires

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer, the screen will go blank and the ! (power) indicator will either light up green or flash orange. If the ! (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard or moving the mouse.

xIf the ! (power) indicator is green1 Disconnect the video signal cable, or turn off the connected computer.2 Turn the monitor OFF and then ON.

3 Hold the control button upward for a few seconds before the monitor enters power saving mode.

If all 4 color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cables and check the condition of your computer.

If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor’s condition.

xIf the ! (power) indicator is flashing orangeTurn the monitor OFF and then ON.

If the ! (power) indicator lights up green, the monitor is working properly.

If the ! (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the ! (power) indicator and inform your authorized Sony dealer of the monitor’s condition. Be sure to note the model name and serial number of your monitor. Also note the make and model of your computer and graphics board.

Specifications

CRT

0.24mm aperture grille pitch, 90-degree deflection, FD Trinitron 19 inches measured diagonally

Viewable image size

Approx. 365 ⋅ 274 mm (w/h) (14 3/8 ⋅ 10 7/8 inches) 18.0" viewing image

Resolution (H:Horizontal, V:Vertical)

Maximum: H: 1920 dots, V: 1440 lines

Recommended: H: 1280 dots, V: 1024 lines

Input signal levels

Video signal: Analog RGB: 0.700 Vp-p (positive), 75 Ω

SYNC signal: H/V separate or composite sync: TTL 2 kΩ, Polarity free

Sync on Green: 0.3 Vp-p (negative)

Standard image area

Approx. 352 ⋅ 264 mm (13 7/8 ⋅ 10 1/2 inches)

Deflection frequency (H:Horizontal, V:Vertical)

H:30 to 96 kHz, V: 48 to 170 Hz AC input voltage/current

	100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power Consumption
	Approx. 135 W
Operating temperature
	10 ºC to 40 ºC
Dimensions	Approx. 451 ⋅ 471 ⋅ 461 mm (w/h/d)
	(17 7/8 ⋅ 18 5/8 ⋅ 18 1/4 inches)
Mass	Approx. 25.5 kg (56 lb 3 oz)
Plug and Play	DDC2B/DDC2Bi	GB
	GTF

Supplied accessories

Power cord

This instruction manual

(continued)

7