Viewing images on a TV screen

1Connect the AC adaptor, then plug the adaptor into a wall outlet (wall socket).

Connect the A/V connecting cable (supplied) to the A/V OUT (MONO) jack of the Cyber-shot Station and the audio/video input jacks of the TV.

You must use either the AC adaptor (AC-LS5/LS5B) comes with the Cyber- shot, or an optional AC adaptor (AC-LS5).

A/V connecting cable

AC adaptor To a wall outlet (wall socket)

 

Power cord

DC plug

(mains lead)

If your TV has stereo input jacks, connect the audio plug (black) of the A/V connecting cable to the left audio jack.

–Turn off both the camera and the TV before connecting the camera and the TV with the A/V connecting cable.

2Place the camera on the Cyber-shot Station.

–Make sure the camera is securely attached to the Cyber-shot Station.

3Turn on the TV and set the TV/Video switch to “Video”.

4Set the mode dial of the camera to , and turn on the power.

Press b/B on the Control buttons to select the desired image. You can also operate the camera using the Remote Commander.

–The Cyber-shot Station is compatible with both NTSC and PAL TV systems. For further details, see the operating instructions supplied with the camera.

15-GB