Using the Remote Commander
xIdentifying the parts
PRINT button
POWER button
/
(Playback zoom) button
MENU button
Control buttons (v/V/b/B/
) 
(Display / LCD on/off) button
The buttons on the Remote Commander have the same functions as those on your camera.
WARNING
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.
Notes on the Remote Commander
•The Remote Commander is powered by a button type lithium battery (CR2025) installed at the factory. To avoid draining the battery, an insulating sheet is inserted. Before using the Remote Commander for the first time, remove the insulation sheet.
•Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting. Otherwise, the Remote Commander may not function properly.
•The remote control range is less than five meters (when using indoor). Point the Remote Commander at the remote sensor of the