5Place the camera on the Cyber-shot Station and turn on the camera.

POWER button

POWER button*

*You can turn the camera on either by pressing POWER button or rotating the lens portion for DSC-F88. For further details, see the operating instructions supplied with the camera.

–Make sure the camera is securely attached to the Cyber-shot Station.

6“USB Mode Normal” appears on the LCD screen of the camera.

When a USB connection is established for the first time, your computer automatically runs the used program to recognize the camera. Wait for a while.

USB Mode

Normal

Access indicators*

Switch on MENU

–If “USB Mode Normal” does not appear, press MENU button, select [USB Connect], and set it to [Normal].

*During communication, the access indicators turn red.

Do not operate the computer until the indicators turn white.

USB Connect

PictBridge

PTP

Normal

–During the USB connection, do not remove the camera, the USB cable or the AC adaptor from the Cyber-shot Station. The image data in the camera may be damaged.

–For further details, see the operating instructions supplied with the camera.

12-GB