Charging the battery pack

1Open the battery/“Memory Stick” cover of the camera.

2Install the battery pack into the camera, then close the battery/ “Memory Stick” cover.

3Connect the AC adaptor to the DC IN jack of the Cyber-shot Station. Connect the power cord (mains lead) to the AC adaptor and to a wall outlet (wall socket).

–You must use either the AC adaptor (AC-LS5/LS5B) comes with the Cyber-shot, or an optional AC adaptor (AC-LS5).

–Do not short the DC plug of the AC adaptor with a metalic object, as this may cause a malfunction.

4Place the camera on the Cyber-shot Station.

Charging starts automatically. Both the /CHG lamp of the camera and the CHARGE lamps of the Cyber-shot Station light up.

While charging, the CHARGE lamps of the Cyber-shot Station light up one by one, from the left to the right. When charging is completed, the /CHG lamp of the camera and the CHARGE lamps of the Cyber-shot Station go off.

Note: The CHARGE lamps do not indicate the charging level of the battery.

–When charging the battery pack, make sure the camera is turned off.

–Make sure the camera is securely attached to the Cyber-shot Station.

10-GB