
SymptomCause/Solution
Your computer does not recognize your camera
•The camera is turned off. tTurn on the camera.
•You are not using the supplied USB cable. tUse the supplied USB cable.
•The USB cable is not connected firmly.
tDisconnect the USB cable from both the computer and the
•The camera is not placed on the
tPlace the camera correctly.
•The USB connectors on your computer are connected to other equipment besides the keyboard, the mouse, and the
tDisconnect all equipment other than the
keyboard, the mouse, and the Cyber- shot Station from the USB connectors.
The camera does not work, | • The camera is not placed on the |
and no operations can be | Station correctly. |
performed | tPlace the camera correctly. |
The Remote Commander | • The AC adaptor is disconnected. |
does not work | tProperly connect the AC adaptor. |
| • The battery in the Remote Commander is |
| dead. |
| tReplace it with a new one. |
The connection between the printer and the
•The printer is not
•The printer is not set for the connection with the camera.
tCheck that the printer is turned on and can connect with the camera.
•[USB Connect] is not set to [PictBridge] in the SET UP settings.
tSet it to [PictBridge].