About the display

•When you push the 3-way control key toward N/>after changing the CD or turning off and on the player, the total number of tracks in the CD and total playing time appear for about two seconds.

•While a track on the audio CD is playing, the track number and the elapsed playing time of the current track appear.

•While a file on the MP3 CD is playing, the file name, the file number and the elapsed playing time of the current file appear.

When closing the lid of the CD player with the power supply attached

While the “” flashes in the display, the CD starts rotating and will stop after the CD player reads the disc information. This helps to shorten the waiting time before playback starts.

If the volume level does not increase

If “AVLS” flashes in the display, hold down SOUND until “AVLS” disappears from the display. For details, see “Protecting your hearing (AVLS).”

About CD-Rs/CD-RWs and MP3 files

•This CD player can play CD-Rs/CD-RWs recorded in the CD-DA format* and MP3 files recorded in the CD-ROM format, but playback capability may vary depending on the quality of the disc and the condition of the recording device.

*CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs.

•Finalize the CD-Rs/CD-RWs and MP3 files before use.

–If you use a disc recorded in the MP3 format that is not finalized, it will take longer than finalized discs to start playback.

–If you use a disc recorded in the CD-DA format that is not finalized, it will not play.

Removing the CD

Remove the CD while pressing the pivot in the center of the tray.

8