Using dry batteries

Use only the following dry battery type for your CD player:

• LR6 (size AA) alkaline batteries

Note

Be sure to remove the AC power adaptor when using the dry batteries.

1 Open the battery compartment lid.

2 Insert two LR6 (size AA) batteries by matching the 3 to the diagram in the battery compartment.

To remove the batteries

Remove the batteries in the same way as rechargeable batteries.

When to replace the batteries

You can check the remaining power of the batteries in the display.

Battery power is full. r

r

Battery power is getting low. r

r

Battery power is low.

r

Lo batt* Batteries are depleted.

* Beep sounds.

When the batteries are depleted, replace both batteries with new ones.

Using the battery case

(for the customers supplied with the

battery case)

You can extend power by inserting the rechargeable batteries or dry batteries in the CD player and attaching the battery case. The batteries in the CD player and battery case are discharged simultaneously.

1 Remove the cap of the battery case, and insert two LR6 (size AA) alkaline batteries by matching the

3to the diagram outside the battery case and close the cap of the battery case.2 Connect the battery case to the CD player. to EXT BATT/DC IN 4.5 VWith the v side up

Notes

•Be sure to remove the AC power adaptor when attaching the battery case.

•When using the rechargeable batteries and dry batteries together to extend power, use fully charged rechargeable batteries and new dry batteries.

20