BConnecting your CD player

Connecting a stereo system

You can listen to CDs through a stereo system and record CDs on a cassette tape and a MiniDisc. For details, see the instruction manual that comes with the connected device.

Be sure to turn off all connected devices before making connections.

to LINE OUT (OPTICAL)

Optical

Connecting

cord
digital

 

connecting

Left (white)

cord

Right (red)

 

MiniDiscStereo system,
cassette recorder,
recorder, DAT
radio cassette
deck, etc.
recorder, etc.

Notes

Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers.

Use the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording.

Adjust the volume properly on the connected device so that the sound will not be distorted.

When using the connecting cord

If the sound is distorted, connect the device to the i jack.

When using the optical digital connecting cord

To record a CD on a MiniDisc, DAT, etc., make sure that the CD player is in pause before operating the recording procedures.

About the G-PROTECTION and SOUND functions when using the connecting cord or optical digital connecting cord

To record high quality CD sound, set the G-PRO switch to “1.”

The SOUND function works only on the output sound from the i jack and not work on the output sound from the LINE OUT (OPTICAL) jack.

(Continued)

player CD your Connecting

17