BConnecting a power source

You can use the following power sources:

•Rechargeable batteries

•AC power adaptor (see “Playing a CD”)

•LR6 (size AA) alkaline batteries (external battery case)

For the battery life and charging time of the rechargeable batteries, see “Specifications.”

Using the rechargeable batteries

Charge the rechargeable batteries before using them for the first time. You can use only the following rechargeable batteries for your CD player.

•NH-14WM

•NC-6WM

1 Open the battery compartment lid inside your CD player.

2 Insert two rechargeable batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place.

Put the end of the ribbon inside.

3 Connect the AC power adaptor to the EXT BATT/DC IN 4.5 V jack of your CD player and an AC outlet, then press x/CHG to start charging.

If the AC power adaptor does not fit the AC outlet, use the AC plug adaptor.

x/CHG buttonCHG/HOLD lamp

to EXT BATT/ DC IN 4.5 V

AC power adaptor

to an AC outlet

The CD player charges the batteries. The

indicator sections of in the display of the remote control light up in succession and the CHG/HOLD lamp lights up.

When the batteries are completely charged, all indications in the display disappear and the CHG/HOLD lamp goes off.

If you press x/CHG after the charge has already been completed, the

indicator flashes and “FULL” appears in the display.

4 Disconnect the AC power adaptor.

(Continued)

source power a Connecting

19