To remove the rechargeable batteries

Remove the batteries as illustrated below.

When to charge the rechargeable batteries

When the batteries become weak, “Lo batt” appears in the display with the beep sound. To keep the original battery capacity for a long time, charge the batteries only when they are completely depleted.

When to replace the rechargeable batteries

If the battery life becomes shorter by about half, replace the batteries with new rechargeable batteries.

Note on the rechargeable batteries

If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times.

Using dry batteries

Make sure to use the supplied battery case. Use only the following dry battery type for your CD player:

• LR6 (size AA) alkaline batteries

1 Remove the cap of the battery case, and insert two LR6 (size AA) alkaline batteries by matching the

3to the diagram outside the battery case and close the cap of the battery case.2 Connect the battery case to the CD player.

to EXT BATT/ DC IN 4.5 V

With the v side up

(Continued)

source power a Connecting

19