Symptom

Cause and/or corrective actions

CHARGE lamp flashes when

c The buttons are locked. Slide the HOLD switch back. (page 15)

you press a button, the CD

 

does not play.

 

Cannot adjust the volume with the VOL +/– buttons on the CD player.

cThe CD player is connected to an audio device. Adjust the volume using the volume control on the connected device. (page 17)

During recording with optical

c Record the track number again using a MiniDisc recorder, DAT

digital connection, the track

recorder, etc. (page 17)

number cannot be recorded

c See the instruction manual that comes with the recording device.

correctly.

(page 17)

The rechargeable batteries

c The terminals on the CD player or the charging stand are dirty.

cannot be charged.

Wipe them with a dry cloth.

 

c The CD is playing. Stop play.

 

c The external battery case is connected to the CD player. Remove it

 

and start charging again.

Playback starts from the point you stopped. (resume function)

cThe resume function is working. To start playing from the first track, turn the rotary control on the remote control toward N/> and hold it until the first track starts playing (press > N for 2 seconds or more for the CD player), or open the lid of the CD player. Or, remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 7, 8, 19, 22)

Rustling noise is heard from

c Close the lid of the battery compartment firmly. (page 19)

the CD.

 

When closing the lid of the CD player, the CD starts to rotate.

cThe CD player is reading the information on the CD. It is not malfunctioning.

You cannot operate the CD

c The buttons on the CD player are kept pressed by mistake.

player properly using the

 

remote control.

 

information Additional

27