Symptom | Cause and/or corrective actions |
CHARGE lamp flashes when | c The buttons are locked. Slide the HOLD switch back. (page 15) |
| you press a button, the CD |
|
| does not play. |
|
Cannot adjust the volume with the VOL +/– buttons on the CD player.
cThe CD player is connected to an audio device. Adjust the volume using the volume control on the connected device. (page 17)
During recording with optical | c Record the track number again using a MiniDisc recorder, DAT |
digital connection, the track | recorder, etc. (page 17) |
number cannot be recorded | c See the instruction manual that comes with the recording device. |
| correctly. | (page 17) |
The CD player does not start | c During stop, press x/CHARGE. (page 19) |
| charging. | c You pressed x on the remote control. Press x/CHARGE on the |
| CD player. (page 19) |
cThe resume function is working. To start playing from the first track, turn the rotary control on the remote control toward N/> and hold it until the first track starts playing (press > N for 2 seconds or more for the CD player), or open the lid of the CD player. Or, remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 7, 8, 19, 21)
Rustling noise is heard from | c Close the lid of the battery compartment firmly. (page 19) |
| the CD. |
|
cThe CD player is reading the information on the CD. It is not malfunctioning.
| You cannot operate the CD | c The buttons on the CD player are kept pressed by mistake. |
| player properly using the |
|
| remote control. |
|
25