BConnecting to a power source

Using the dry batteries

Use only the following dry battery type for your CD player:

• LR6 (size AA) alkaline batteries

For the battery life, see “Specifications.”

Note

Be sure to remove the AC power adaptor when using the dry batteries.

1 Slide OPEN to open the lid of your CD player, then open the battery compartment lid inside the player.

2 Insert two LR6 (size AA) batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place.

Insert the # end first (for both batteries).

When to replace the batteries

You can check the remaining power of the batteries in the display.

t t t t

t Lo batt*

* Beep sounds.

When the batteries are depleted, replace both batteries with new ones.

Notes

The indicator sections of

roughly show the

 

remaining battery power. One section does not

 

always indicate one-fourth of the battery power.

Depending on operating conditions, the indicator

 

sections of

may increase or decrease.

To remove the batteries

Remove the batteries as illustrated below.

To attach the battery compartment lid

If the battery compartment lid is detached by an accidental drop, excessive force, etc., attach it as illustrated below.

to Connecting

power a source

25