BConnecting to a power source

Using the dry battery

Use only the following dry battery type for your CD player:

• LR6 (size AA) alkaline battery

For the battery life, see “Specifications.”

Note

Be sure to remove the AC power adaptor when using the dry battery.

1 Squeeze OPEN from both sides to

open the lid of your CD player, then open the battery compartment lid inside the player.

2 Insert the LR6 (size AA) alkaline battery (not supplied) by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place.

Insert the # end first.

When to replace the battery

You can check the remaining power of the battery in the display.

tttt

t Lobatt*

* Beep sounds.

When the battery is depleted, replace the dry battery with new one.

Notes

•

The indicator sections of

roughly show the

 

remaining battery power. One section does not

 

always indicate one-fourth of the battery power.

•

Depending on operating conditions, the indicator

 

sections of

may increase or decrease.

To remove the battery

Remove the battery as illustrated below.

To attach the battery compartment lid

If the battery compartment lid is detached by an accidental drop, excessive force, etc., attach it as illustrated below.

28