Stopping playback automatically (OFF TIMER)

You can set the CD player to stop playback automatically within a range of 1 to 99 minutes by one minute. While the timer function is working, “ ” appears at about 5- second intervals.*

*When Screen 1, 2 or 3 is displayed (Audio CD: when Screen 1 or 2 is displayed) (page 16)

1 Press DISPLAY/MENU until the MENU screen appears. Turn the jog dial to select “OPTION,” then press DISPLAY/MENU.

2 Turn the jog dial to select “TIMER,” then press DISPLAY/MENU to enter the selection.

3 Turn the jog dial to select “10 min*,” then press DISPLAY/MENU.

*Default setting. If you have changed the setting, the length of time already set appears.

4 Turn the jog dial to select the length of time you want to set from “01 min” to “99 min,” then press DISPLAY/MENU to enter the selection.

To return to the previous screen

Press – on the CD player.

To cancel the setting operation

Push the 5-way control key toward x.

To check the length of time before the CD player stops playback

During play, perform steps 1 - 3.

To cancel the OFF TIMER function

Perform steps 1 - 3, changing the OFF TIMER setting to “OFF.”

Locking the controls

(HOLD)

You can lock the controls on your CD player to prevent accidental button presses.

If you press any button when the HOLD function is activated, the OPR lamp flashes and “HOLD” also flashes in the display .

Slide HOLD in the direction of the arrow.

You can use the HOLD function with both the CD player and the remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off.

To unlock the controls

Slide HOLD in the direction opposite to that of the arrow.

vailableA features

25