Troubleshooting

Symptom

Cause and/or corrective actions

Playback starts from the point

c The resume function is working. To start play from the first track,

you stopped. (resume

press u during stop until the first track starts playing, or open the

function)

lid of the CD player. Or remove all power sources, then insert the

 

batteries or connect the AC power adaptor again.

 

(pages 11, 12, 24)

Rustling noise is heard from

c Close the lid of the battery compartment firmly. (page 24)

the CD.

 

When using with a connected stereo system, the sound is distorted or noisy.

cAdjust the volume of the CD player and the connected device. (page 23)

During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally.

cThe CD player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. The player is not malfunctioning.

“NO FILE” appears on the

c There are no ATRAC3plus/ATRAC3/MP3 files in the CD.

display after u is pressed

c

A CD-RW from which the data has been erased is being used.

or the lid of the CD player is

c

The CD is dirty.

closed.

 

 

When closing the lid of the CD player, the CD starts to rotate.

cThe CD player is reading the information on the CD. The player is not malfunctioning.

The LCD display becomes

c You are using your CD player at high temperatures (above 40°C/

hard to see or slows down.

104°F) or at low temperatures (below 0°C/32°F). At room

 

temperature, the display will return to its normal operating

 

condition.

“ ” is flashing quickly in

c The CD player has entered the Bookmark track play. Press

the display, and you cannot

P MODE/ repeatedly until “ ” disappears from the display.

locate the beginning of the

 

track or the specific point in

 

the track.

 

28-GB