BConnecting to a power source
You can check the remaining power of the batteries in the display.
ttttt
Lobatt*
* Beep sounds.
When the batteries are depleted, charge the rechargeable batteries or replace the dry batteries with new ones.
Notes
• | The indicator sections of | roughly show the | |
| remaining battery power. One section does not | ||
| always indicate | ||
• | Depending on operating conditions, the indicator | ||
| sections of | may increase or decrease. |
For the battery life and charging time of the rechargeable batteries, see “Specifications.”
Using the batteries
Use only the following batteries for your CD player.
Rechargeable batteries
Charge the rechargeable batteries before using them for the first time.
•
Dry batteries
• LR6 (size AA) alkaline batteries
Inserting the batteries
1 Slide OPEN to open the lid of your CD player, then open the battery compartment lid inside the player.
2 Insert two batteries by matching the 3 to the diagram in the battery compartment and close the lid
until it clicks into place. Connectingto
power a source
Insert the # end first (for both batteries).
(Continued)
33