Leak Testing
1.Turn all grill control knobs to OFF.
2.Be sure gas hose is tightly connected to gas source.
3.Completely open gas source. If you hear a rushing sound, turn gas off immediately. There is a major leak at the connection. Correct before proceeding.
4.Brush soapy solution onto area circled below.
5.If “growing” bubbles appear, there is a leak. Close gas source immediately and tighten connection. If leaks cannot be stopped do not try to repair. Call for replacement parts. Order new parts by giving the serial, model number and name of items needed to the Grill Service Center at
6.Always close gas source after performing leak test.
CAUTION
CAUTION: Sideburner lid must be open when sideburner is in operation, if so equipped.
Burner Flame Check
•Remove cooking grates and flame tamers. Light burners, rotate knobs from HIGH to LOW. You should see a smaller flame in low position than seen on HIGH. Perform burner flame check on sideburner also. Always check flame prior to each use. If only low flame is seen refer to "Sudden drop or low flame" in the Troubleshooting Section.
HIGH
LOW
Hose Check
•Before each use, check to see if hoses are cut, worn or kinked. Replace damaged hoses before using grill. Use only valve/hose/regulator specified by manufacturer.
Safety Tips | Normal | Kinked |
| ||
When grill is not in use, turn off all control knobs and gas | Hose | Hose |
source. |
|
|
PARTS LIST/DIAGRAM | Note: Illustrations are not to scale. |
| ||
|
|
|
|
|
Key | Qty. | Description |
| Part No. |
A | 5 | Main Burner and Sideburner Natural Gas Bezel | 80004350 | |
B | 1 | Stove and Griddle Natural Gas Bezel | 80004352 | |
C | 1 | Orifice Removal Tool | 80004378 | |
D | 1 | 10 ft., 3/8” Natural Gas Hose | 3496263 | |
E | 1 | Rotisserie Burner Orifice (Light Blue | 80006910 | |
|
|
|
|
|
A | B | C | D | E |
| Tools required for assembly: |
|
| |
| Orifice Removal Tool - Provided | Adjustable Wrench - Not provided |
| |
| Estimated assembly time: |
|
| |
4 • Natural Gas Conversion Kit
