Telenetics 1.2 manual Technical, Specifications, RS232, 5-3/8 x 4 x 1-3/8

Models: 1.2

1 2
Download 2 pages 61.24 Kb
Page 2
Image 2
Technical

25111 Arctic Ocean Drive Lake Forest, CA 92630

tel. 949.455.4000 fax. 949.455.4010 www.telenetics.com

Technical

MIU/PowerPort

MIU/PowerPort

MIU/PowerPort

 

MIU/PowerPort

Specifications

202T

2.4

9.6 & 9.6L

 

 

14.4 & 14.4L

 

 

 

 

 

 

 

 

 

 

 

 

Modem Line

 

2400,

1200,

2400,

1200,

 

 

14400,

9600,

4800,

Speeds:

0 - 1200bps

 

 

300bps

300bps

 

 

2400,

1200,

300bps

Asynchronous

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DTE Rates: above

 

 

 

 

 

 

 

 

 

 

 

modem line speeds

Ñ

Ñ

 

19200, 9600,

 

 

57.6,

38.4,

(ie; with data

 

4800bps

 

 

19.2kbps

 

 

 

 

 

compression)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V.22bis, V.22

V.22bis, V.22

 

V.32bis,

 

 

V.32

Standards:

Bell 202T

Bell 212A

Bell 212A

 

V.22bis,

 

 

V.22

 

 

Bell

103

Bell 103

 

Bell 212A,

Bell 103

 

 

 

 

 

 

 

Dial Up

No

Yes

Yes (Model 9.6)

 

 

Yes (Model 14.4)

 

 

 

 

 

 

 

2 / 4-W Leased Line

Yes1

No

Yes (Model 9.6L2)

 

 

Yes (Model 14.4L2)

 

 

 

 

 

 

 

 

 

 

Configuration

Dip Switch

 

 

Hayesª Extended AT Command

Set

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Error Correction/

None

None

 

 

MNP 2, 4,

5 & 10

 

 

 

Data Compression

 

 

V.42, V.42bis

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+5VDC ±5% in through Pin 10 on the DB25 Data Port

 

 

 

Power Requirement

(Option: 7-16VDC in through Pin 10 on the DB25 Data Port. Please Specify -PO.)

 

 

The modem can also be powered from an

 

 

 

 

 

 

 

 

 

 

 

 

 

optional 120VAC wall transformer model WT/120-9VA.

 

 

 

 

 

 

 

 

 

 

 

128mA @ +5VDC

64mA @ +5VDC

100mA @ +5VDC

 

 

219mA @ +5VDC

Current

71mA @ 12VDC

35mA @ 12VDC

56mA @ 12VDC

 

 

123mA @ 12VDC

Consumption

Dial up modems can be factory set to automatically fall into ÒPower DownÓ mode after 45 seconds of

 

 

inactivity. Draws <0.2mA in power down mode. Powers back up on receipt of DTR signal or incoming call.

Digital Port

 

 

RS232

with DB25 Female Connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog Port

 

 

 

RJ-11 Modular Jack

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Surge Protection

3.75kVac

5kVac

5kVac

 

 

3.75kVac

(Analog Port)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Environment

 

-40¡C

to +85¡C,

0 to 95% humidity (non-condensing)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Case Size

 

 

 

5-3/8" x 4" x 1-3/8"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Certifications

 

FCC Part 68 Class A; Industry Canada Certified

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Important Notes regarding leased line operation: 1Bell202T is half or full duplex, suitable for point-to-point and multipoint applications. 2The standard 9.6L and 14.4L models are 4-wire, full or half duplex, point-to-point only. 2-wire, full duplex, point-to-point available on special order.

Document #0004 0700

Telenetics is a registered trademark of Telenetics Corporation. All other trademarks are the property

of their respective holders. ©2000 Telenetics Corporation. All rights reserved.

Page 2
Image 2
Telenetics 1.2 manual Technical, Specifications, RS232, 5-3/8 x 4 x 1-3/8