Troubleshooting

Symptom

Cause and/or corrective actions

The CD does not play or

c

The buttons are locked. Slide the HOLD switch back. (page 25)

“No disc” appears in the

c The CD is dirty or defective.

display when a CD is placed

c

Check that the CD is inserted with the label side up. (page 11)

in the CD player.

c Moisture condensation has occurred.

 

 

Leave the CD player aside for several hours until the moisture

 

 

evaporates.

 

c Close the lid of the battery compartment firmly. (page 11)

 

c Make sure the batteries are inserted correctly. (page 11)

 

c Connect the AC power adaptor to an AC outlet securely. (page 28)

 

c Press u after one second or more has passed since the AC power

 

 

adaptor was connected.

 

c The CD-R/RW is blank.

 

c There is a problem with the quality of the CD-R/RW, recording

 

 

device, or application software.

 

c Files in two or more formats have been recorded on the CD-R/RW.

 

 

(page 7)

“HOLD” flashes on the

c

The buttons are locked. Slide the HOLD switch back. (page 25)

display when you press a

 

 

button, and the CD does not play.
Cannot adjust the volume with VOL +/– on the CD player.

cThe CD player is connected to an audio device. Adjust the volume using the volume control on the connected device. (page 26)

The CD player does not start

c

During stop, press x/CHARGE. (page 27)

charging.

 

 

Playback starts from the point

c The resume function is working. To start play from the first track,

you stopped. (resume

 

press u during stop until the first track starts playing, or open the

function)

 

lid of the CD player. Or remove all power sources, then insert the

 

 

batteries or connect the AC power adaptor again.

 

 

(pages 11, 12, 27, 28)

Rustling noise is heard from

c

Close the lid of the battery compartment firmly. (page 11)

the CD.

 

 

32