BConnecting to a power source

You can use the following power sources:

AC power adaptor (see “Playing an audio CD or ATRAC3plus/ATRAC3/MP3 files”)

LR6 (size AA) alkaline batteries

For the battery life, see “Specifications.”

To remove the batteries

Remove the batteries as illustrated below.

Using the dry batteries

Use only the following dry battery type for your CD player:

• LR6 (size AA) alkaline batteries

Note

Be sure to remove the AC power adaptor when using the dry batteries.

1 Open the battery compartment lid inside your CD player.

When to replace the batteries

You can check the remaining power of the batteries in the display.

Replace the batteries when “” flashes.

ttttt

Lo batt*

2 Insert two LR6 (size AA) batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place.

Insert # end first (for both batteries).

* Beep sounds.

When the batteries are depleted, replace both batteries with new ones.

Notes

The indicator sections of

roughly shows the

 

remaining battery power. One section does not

 

always indicate one-fourth of the battery power.

Depending on operating conditions, the indicator

 

sections of

may increase or decrease.

To attach the battery compartment lid

If the battery compartment lid is detached by an accidental drop, excessive force, etc., attach it as illustrated below.

30-GB