Step 3: Performing the Quick Setup
Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the area.
"/1
C/X/x/c,
DISPLAY
1 Turn on the TV.2 Press [/1.Note
•Make sure that the function is set to “DVD” (page 36).
3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 34).
4 Press without inserting a disc.The Setup Display for selecting the language used in the
LANGUAGE SETUP
OSD:ENGLISH
MENU:ENGLISH
AUDIO:FRENCH
SUBTITLE:SPANISH
PORTUGUESE
The Setup Display for selecting the aspect ratio of the TV to be connected appears.
VIDEO SETUP
TV TYPE: |
| 16:9 |
PROGRESSIVE (COMPONENT | 16:9 | |
4:3 OUTPUT: | 4:3 LETTER BOX | |
BLACK LEVEL: | 4:3 PAN SCAN | |
BLACK LEVEL (COMPONENT OUT): | OFF | |
PAUSE MODE: |
| AUTO |
•[16:9]: For a
•[4:3 LETTER BOX] or [4:3 PAN SCAN]: For a 4:3 standard TV (page 60)
The Setup Display for the Control for HDMI function appears.
HDMI SETUP
HDMI RESOLUTION: | AUTO(1920x1080p) | |
CONTROL FOR HDMI: |
| ON |
VOLUME LIMIT: |
| ON |
YCBCR/RGB(HDMI): |
| OFF |
AUDIO(HDMI): |
| OFF |
JPEG RESOLUTION: |
| SD |
•[ON]: The Control for HDMI function (page 70) is set to on.
•[OFF]: The Control for HDMI function is set to off.
The Setup Display for selecting the speaker formation appears.
SPEAKER FORMATION
STANDARD
Started Getting