•REAR
—BEHIND (LOW), BEHIND (HIGH), SIDE (LOW), SIDE (HIGH): Specify the position and height to implement the Digital Cinema Surround modes in the “Virtual Multi Dimension” sound field (page 48) properly.
—NONE: Select this if no rear speaker is used.
•SUBWOOFER
—YES
Notes
•When you select an item, the sound cuts off for a moment.
•Depending on the settings of other speakers, the subwoofer may output excessive sound.
Specifying the rear speaker position
and height
If you select anything other than “NONE” in “REAR,” specify the position and height of the rear speakers. The default setting is underlined.
BEHIND (LOW) | Select this if the rear |
| speakers are located in |
| section B and D. |
BEHIND (HIGH) | Select this if the rear |
| speakers are located in |
| section B and C. |
SIDE (LOW) | Select this if the rear |
| speakers are located in |
| section A and D. |
|
|
SIDE (HIGH) | Select this if the rear |
| speakers are located in |
| section A and C. |
These parameters are not available when “REAR” is set to “NONE.”
Position diagram
| 90 |
A | 45 A |
B | B |
| 20 |
Height diagram
C 
C
60
D D
30
xDISTANCE
The default distance setting for the speakers in relation to the listening position is shown below.
| 5m |
| (17ft) |
5m | 5m |
(17ft) | (17ft) |
3.4m3.4m
(12ft)(12ft)
Be sure to change the value in the Setup Display when you move the speakers. The default adjustments are in parentheses.
68