Sony DAV-SR2 Settings for the Speakers, (SPEAKER SETUP), 76GB, xSIZE, xDISTANCE, To return to the default setting when changing a setting, Select the item, then press CLEAR

Settings for the Speakers

(SPEAKER SETUP)

To obtain the best possible surround sound, set for the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level.

Select [SPEAKER SETUP] in the Setup Display. For details, see “Using the Setup Display” (page 71).

FRONT YES

CENTER YES: Normally select this. NONE: Select this if no center speaker is used.

SURROUND BEHIND: Select this if surround speakers are located in section B. SIDE: Select this if surround speakers are located in section A. NONE: Select this if no surround speaker is used.

SURROUND NONE: Normally select this.

BACKYES: Select this if the surround back (appears except

The default settings are underlined.

when you set [SURROUND] to [NONE] in the [SIZE] setting.)

speaker is used.

SPEAKER SETUP

SIZE:

DISTANCE:

LEVEL:

BALANCE:

TEST TONE:

To return to the default setting when changing a setting

Select the item, then press CLEAR.

xSIZE

If you do not connect center or surround speakers, or move the surround speakers, set the parameters for [CENTER] and [SURROUND] and specify the surround speaker position and height. Since the front speaker and subwoofer settings are fixed, you cannot change them.

If you connect the surround back speaker, set [SURROUND BACK] to [YES].

Position diagram

	90
A	45 A
B	B
	20

SUBWOOFER YES

Notes

•When you select an item, the sound cuts off for a moment.

•Depending on the settings of other speakers, subwoofer may be excessive.

xDISTANCE

The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using the Quick Setup (page 23), the settings is automatically displayed.

1.6m

1.6m 1.6m

1.6m 1.6m

1.6m

76GB