Step 2: Charging the battery pack
2 |
|
|
| POWER switch |
|
|
|
| |
|
|
|
| 1 |
Battery |
| DC IN jack |
| |
|
|
| ||
3 |
|
| 4 | CHG |
|
|
| ||
|
|
|
| (charge) lamp |
|
|
| Power cord |
|
DC plug | AC Adaptor | 4 | To the wall outlet | |
Jack cover |
| |||
You can charge the “InfoLITHIUM” |
|
|
| |
battery pack (H series) (p. 106) after |
| 4 Connect the power cord to the AC | ||
attaching it to your camcorder. |
| |||
b Notes |
|
| Adaptor and the wall outlet. | |
|
| The CHG (charge) lamp lights up and | ||
• You can use only "InfoLITHIUM" battery pack |
| |||
| charging starts. The CHG (charge) lamp | |||
H series. |
|
| turns off when the battery is fully | |
|
|
| ||
|
|
| charged. |
|
1 Turn the POWER switch in the |
| 5 Disconnect the AC Adaptor from | ||
direction of the arrow to OFF |
| |||
(CHG) (The default setting). |
| |||
| the DC IN jack on your | |||
|
|
| ||
2 Attach the battery pack by sliding |
| camcorder. |
| |
|
|
| ||
it in the direction of the arrow |
|
|
| |
until it clicks. |
|
| b Notes |
|
Lift up the viewfinder and attach |
| • Disconnect the AC Adaptor from the DC IN | ||
the battery pack by sliding it in |
| jack holding both the camcorder and the DC | ||
the direction of the arrow until it |
| plug. |
|
clicks.
3 Connect the AC Adaptor to the DC IN jack of your camcorder.
Open the jack cover, and connect the
DC plug of the AC Adaptor.
Match the v mark on the DC plug with the v mark on your camcorder.
22