You can select how to play back audio recorded on a tape in stereo mode.
GSTEREO | Select to play back a stereo tape or dual sound track tape with main |
| and sub sound. |
|
|
1 | Select to play back a stereo tape with the left channel sound or a dual |
| sound track tape with main sound. |
|
|
2 | Select to play back a stereo tape with the right channel sound or a dual |
| sound track tape with sub sound. |
|
|
bNotes
•You can play back a dual sound track cassette on this camcorder. However, you cannot record a dual sound track on this camcorder.
•The setting returns to [STEREO] when you disconnect the power source from your camcorder for more than 5 minutes.
AUDIO MIX
You can adjust the audio balance between the originally recorded sound (ST1) and sound added afterwards (ST2) on the tape (p. 106).
bNotes
•You cannot adjust sound recorded in 16 bit audio mode.
•Only the originally recorded sound will be heard when you disconnect the power source from your camcorder for more than 5 minutes.
LCD/VF SET
The recorded picture will not be affected by this setting.
LCD BRIGHT
See page 20 for details.
LCD BL LEVEL
You can adjust the brightness of the LCD screen’s backlight.
GNORMAL | Standard brightness. |
|
|
BRIGHT | Select to brighten the LCD screen. |
|
|
bNotes
•When you connect your camcorder to outside power sources, [BRIGHT] is automatically selected for the setting.
•When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
84Using the Menu