Creating a DVD with One Touch (continued)

•If you cannot copy all your image data on a DVD, the image data is automatically saved on more than one DVD. The required number of DVDs is displayed in step 6 on the screen.

1 Confirm that the camcorder is not connected to a computer.

2 Turn on the computer.

6 Connect the camcorder with a computer using the USB cable.
•Close all applications running on the computer.3 Place the recordable DVD to be saved in the disc drive of your computer.•It is recommended that you use a new recordable DVD.•If any software starts on the computer automatically, close it.

4 Connect your camcorder to the wall outlet using the supplied AC Adaptor, then set the POWER switch to turn on.

•You can perform this operation, whicheverposition of the (Movie) / (Still) / (PLAY/EDIT) is lit.•For operating the POWER switch, see “Camera Operating Guide”.5 Press DVD BURN button of the camcorder.[Check the connected device.] appears on the LCD screen of the camcorder.
DVD creation starts up.

•During DVD creation, do not apply vibration. The DVD creation may be terminated.

•When you insert a burned DVD-RW/ DVD+RW in the disc drive in step 3, a message appears, asking if you want to delete images saved on a DVD.

•Make sure no other USB devices are connected to your computer.

•If your computer has a USB keyboard and a USB mouse as standard equipment, leave them connected and connect the camcorder to an available USB jack with the USB cable.

ACurrent status of all DVD creation BCurrent status per DVDCNumber of DVD created DNumber of DVD required

10