Getting started
Attaching the viewfinder
Before using the digital camcorder, attach the viewfinder. (1) Loosen the viewfinder release ring.
(2) Slide the viewfinder onto the attaching plate.
(3) Adjust the position of the viewfinder, then tighten the viewfinder release ring.
(4) Attach the 8 pin connector to the VIEW FINDER jack on the digital camcorder. Match ridge on 8 pin connector to the ridge on the jack.
12
[a]34
VIEW
FINDER
Note on the VIEW FINDER jackThis VIEW FINDER jack is specially designed for this digital camcorder. Do not connect anything else to this VIEW FINDER jack.
To remove the viewfinderLoosen viewfinder release ring. Then pull stopper [a] up, and while holding, slide viewfinder off the attaching plate.
6