Installing the Escutcheon

■For General Motors

1.Refer to the section <Removing the Hard Rubber Frame> and then remove the hard rubber frame.

2.Cut out accessory 4 to meet the shape of the opening of the center console.

3.Attach accessory 4 to the unit.

Cut out to meet the shape of the opening in the vehicle.

Accessory 4

■For Toyota/Scion

1. Refer to the section <Removing the Hard Rubber Frame> and then remove the hard rubber frame.

2. Cut out accessory 4 as illustrated.

When cutting out accessory 4, make sure it fits the opening of the center console.

3. Fold double-sided adhesive (accessory

Cutting line

Accessory 4

5) along the slit and attach it to

Accessory 5

accessory 4 cut-out against the center rib as illustrated. Use 2 pieces of accessory 5 for 1 accessory 4 cut- out.

4. Attach accessory 4 cut-out to the unit.

English 7