23
Table of Contents Menu Lists Index
GB
The following states will be indicated if data is
still being written onto the memory card after
recording has finished. During this time, do
not apply shock or vibration to this product, or
remove the battery or AC Adaptor.
Access lamp (p. 19) is lit or flashing
The media icon in the upper right of the
screen is flashing
Tips
See page 82 on the recordable time of movies.
You can check the recordable time, estimated
remaining capacity, etc., by selecting
(MENU) [Setup] [ ( Media
Settings)] [Media Info].

To switch the 2D and 3D recording

mode

You can select a recording mode of either
2D or 3D.
To switch 2D and 3D, select (MENU)
[Image Quality/Size] [2D/3D Mode
Select].
Tips
When you change the [2D/3D Mode Select]
setting, movies played back on this product and
movies output from the HDMI OUT jack are
changed between 2D and 3D automatically.

Optimum distance from the subject

and zooming level

The distance at which you can obtain
good 3D movies varies depending on the
zooming level.
Distance from the subject Zoom
about 80 cm to 6 m (3 ft. to
20 ft.)
about 2.5 m to 10 m (8 ft. to
32 ft.)
about 7.5 m to 20 m (25 ft. to
65 ft.)
Notes
When you record 3D movies, the binocular
magnification can be set to up to about 5 times.
If you want to monitor* or record a subject
using a larger image, set [2D/3D Mode Select]
to [2D].
* In this manual, ”monitor” means that the user
watches or views a subject without recording.

Data code during recording

The recording date, time, condition and
coordinates (DEV-5/5K) are recorded
automatically on the memory card. They
are not displayed during recording.
However, you can check them as [Data
Code] during playback. To display them,
select (MENU) [Setup] [
(Playback Settings)] [Data Code]
a desired setting .
Shooting photos

Press MODE to turn on the

(Photo) lamp.

The screen display switches for photo
recording mode.
(Movie): When recording a movie
(Photo): When recording a photo
MODE button