88
Table of Contents Menu Lists Index
GB
About the “InfoLITHIUM” battery pack

This product operates only with an

“InfoLITHIUM” V series battery packs NP-

FV70/FV100.

“InfoLITHIUM” V series battery packs

have the mark.

What is an “InfoLITHIUM” battery pack?

An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between this product and
an AC Adaptor/charger (sold separately).
The “InfoLITHIUM” battery pack calculates the
power consumption according to the operating
conditions of this product, and displays the
remaining battery time in minutes.
The battery pack NP-FV70/FV100 is compatible
with “ActiFORCE.”
“ActiFORCE” is a new generation power
system. Battery capacity, boost charge, and
the speed and accuracy of battery time
remaining calculations have been improved
when compared with current “InfoLITHIUM”
P-series battery.

To charge the battery pack

Be sure to charge the battery pack before you
start using this product.
We recommend charging the battery pack in
an ambient temperature of from 10 C to 30 C
(50 °F to 86 °F) until the CHG (charge) lamp
turns off. If you charge the battery pack outside
of this temperature range, you may not be able
to charge it efficiently.

To use the battery pack effectively

Battery pack performance decreases when the
ambient temperature is 10 C (50 °F) or below,
and the length of time you can use the battery
pack becomes shorter. In that case, do one
of the following to use the battery pack for a
longer time.
Put the battery pack in a pocket to warm it
up, and install it on this product right before
you start taking shots.
Use a large capacity battery pack: NP-FV100
(supplied with DEV-5K).
Have spare battery packs ready for 2 or 3 times
the expected recording time, and make trial
recordings before making the actual recording.
Do not expose the battery pack to water. The
battery pack is not water resistant.

About the remaining battery time

indicator

When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for
a long time, or if left in a fully charged state,
or when the battery pack is frequently used.
Use the remaining battery time indication as a
rough guide only.
The mark that indicates low battery flashes
even if there are still 20 minutes of battery
time remaining, depending on the operating
conditions or ambient temperature.

About storage of the battery pack

If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
this product once a year to maintain proper
function. To store the battery pack, remove it
from this product and put it in a dry, cool place.
To discharge the battery pack on this product
completely, select (MENU) [Setup]
[ ( General Settings)] [A. Shut Off]
[Off], and leave this product in recording
standby until the power goes off (p. 69).

About battery life

Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.