Playing a CD (continued)

Tips

You can start playing from the desired track in step 2.

1Press MD/CD =0 or )+ repeatedly until you find the desired track.

2Press CD ·∏.

•Pressing CD ·∏ (or CD · on the remote) when the power is off automatically turns the power on and starts CD play if there is a CD on the disc tray (One Touch Play).

If you turn the power on when there is a CD on the disc tray, the CD indicator is lit red.

You can switch from another source to the CD player and start playing a CD by pressing CD ·∏ (or CD · on the remote) (Automatic Source Selection).

If there is no CD in the player, “CD NO DISC” appears in the display.

Notes

Do not use a CD with tape, seal or paste on it as this may damage the CD player.

Do not push the disc tray closed, as this may damage the unit. Press CD 6 to close the disc tray.

Recording a CD on an MD

CD-MD Synchro Recording

You can make a digital recording of a CD on an MD, marking track numbers in the same sequence as the original CD. If you use a recorded MD, the MD deck automatically locates the end of the recorded portion and starts recording from there. You can also record a programme of favorite tracks (see page 29).

To turn on the system, press .

MD indicator

1 MD 6 5MD p

4 2,3

1 Insert a recordable MD.

With the arrow pointing toward the deck.

With the label side up and the shutter slide rightward.

12