Connecting to a Macintosh computer (“Memory Stick” only)

Step 1: Installing the USB driver on a computer

The installation of the USB driver is not required for Mac OS 9.1/9.2 or Mac OS X (v10.0/v10.1/v10.2). Skip this section and go on to “Step 2: Connecting your camcorder to a computer” (p. 32).

1 Start up the computer.

2 Place the supplied CD-ROM in the disc drive of the computer.

A screen for selecting model names appears after a while.

3 Click [Handycam].

4 Click [USB Driver].

5 Double-click the icon of the hard disk drive which stores the operating system. Then, double-click the [System Folder] icon.

6 Drag and drop the [Sony Camcorder USB Driver] file and [Sony Camcorder USB Shim] file to [System Folder].

Drag and drop

[USB Driver] folder

[System Folder]

7 When a message appears, click [OK].

The USB driver is installed on the computer.

8 Close the [USB Driver] screen, and eject the CD-ROM from the computer.

9 Restart the computer.

only) Stick” (“Memory computer Macintosh a to Connecting

Connecting to a Macintosh computer (“Memory Stick” only) 31