Using the Magnetic Charging Dock

Using the attachments

Your accessory comes with two attachments of different width. Each attachment can
fit into the charging dock and hold your phone in place while you charge it. Use the
attachment marked with an "A" to attach a phone without a casing. If your phone has
a protective case, use the attachment marked with a "B".
Attachment B may not be compatible with all protective cases.

Charging your phone

To charge your phone using the Magnetic Charging Dock
1Plug the charger cable into the charging dock. Then plug the charger cable into
your phone charger and plug the charger into a power outlet.
2Insert the required attachment into the charging dock.
3Place your phone in the dock so that the connectors on the side of the phone
make contact with the connectors in the dock. The phone now starts to
charge.
4If the Smart Connect pop-up window appears, follow the instructions to enable
a pre-configured set of actions.
Your phone does not charge if you plug the charger cable into the USB port of a computer.
4
This is an Internet version of this publication. © Print only for private use.