Important

Safety

Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this receiver near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other receiver (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the receiver.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the receiver. When a cart is used, use caution when moving the cart/receiver combination to avoid injury from tip-over.

13)Unplug this receiver during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the receiver has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the receiver, the receiver has been exposed to rain or moisture, does not operate normally, or has been dropped.

4

USE

AC power cord and other cables

If you damage the AC power cord or other cables, it may result in a fire or an electric shock. If the AC power cord or other cables is damaged, stop using it at once and contact the Sony service center.

sDo not place the receiver where the power cord and cables are subject to wear or abuse.

sDo not pinch, bend, or twist the cord excessively. The core lines may be bared and cut, and cause a short-circuit, resulting in a fire or an electric shock.

sDo not convert or damage the power cord and cables.

sDo not allow anything to rest on or roll over the power cord and cables.

sDo not pull the power cord and cables.

sDo not move the receiver with the power cord and cables plugged in.

sKeep the power cord and cables away from heat sources.

sBe sure to grasp the plug when disconnecting the power cord and cables.

Wall outlet

Do not use a poor fitting outlet.

Insert the plug fully into the outlet. If it is loose, it may cause arcing and result in a fire.

Contact your electrician to have the outlet changed.

Cable wiring

For your safety, unplug the AC power cord when wiring cables.

Take care not to catch your feet on the cables. It may damage the receiver.

Electric shock

Do not touch the AC power cord or the receiver with a wet hand. If you plug/unplug the AC power cord from the receiver with a wet hand, it may cause electric shock.

Lightning

For added protection for this receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the receiver due to lightning and power line surges.

Small accessories

Keep small accessories out of children's reach.

CLEANING

sClean the AC power plug regularly.

sIf the plug is covered with dust and it picks

up moisture, its insulation may deteriorate and result in a fire.

s Unplug the AC power cord when cleaning this receiver. If not, it may result in electric

shock.

s Clean the casing of the receiver with a dry soft cloth. Stubborn stains may be removed

with a cloth slightly moistened with a solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning.

sIf using a chemically pretreated cloth, please follow the instruction provided on the package.

sDust the ventilation holes with a dry cloth.