Sony DMX-NV1 To Remove the Mounting Bracket

3 Insert the Mounting Knobs into the threaded holes and lightly twist by hand. Do not fully tighten the Mounting Knobs.

4 Place the bottom Mounting Knob into the hole on the bracket, leaving the top Mounting Knob sitting above the top hole.

Cables thread out on this side

5 Push down the receiver so both Mounting Knobs	To Remove the Mounting Bracket
are locked into the grooves, then fully tighten the
Mounting Knobs by hand.	Follow the steps in reverse order. Use a Phillips
	Screwdriver to remove the Plastic Fasteners.

LED Lights

1

NETWORK

INPUT

RESET

IN

2

VIDEO IN

2

VIDEO

L

AUDIO

R

~

Make sure that the cables are organized with the Cable

Cover so that the cables hang out on the same side as the

Mounting Knobs.