DPF-X800/X1000, DPF-V800/V1000
Digital Photo Frame

Read This First

Welcome to the Sony DPF-X800/X1000, DPF-V800/V1000 Digital Photo Frame.
This leaflet explains preparations and basic viewing procedures.

To enjoy a variety of viewing options or customize your photo frame, please read the operating instructions also supplied.

1Preparing the remote control.

The supplied lithium battery (CR2025) has already been inserted into the remote control.

Pull out the protective sheet before use as shown in the figure.
Protective sheet

4Turn the photo frame on.

1 Set to the POWER switch to ON.
Tips
The standby indicator turns green and the Sony logo on the

Keep the POWER set to ON, when you use the alarm function or the auto power on/off function.

front panel lights up.

The value of the following settings are returned to their factory settings if you turn the photo frame to

 

OFF, and leave it off for a long time.

 

the setting value of [Date/time settings]

 

the setting time of the alarm function and the auto power on/off function

2Preparing the photo frame.

Screw the stand supplied with the photo frame into the screw hole firmly until the stand stops turning (when you use the photo frame as a photo stand).

© 2009 Sony Corporation printed in China

4-129-220-12(1)

5Set the current time.

1 Press MENU.
4 Set the current time following the guidance on the screen.

     

2Press to select the(Settings) tab.
3Press to select [Date/time settings] and then press .
Checking the contents of the package

3Connecting to the AC power source.

6Insert a memory card into the slot.

(The illustrations are of the DPF-X1000. The locations and names of buttons and connectors of the DPF-X800, DPF-V1000/V800 are identical to those of the DPF-X1000, although the LCD screen size and shape is different.)

1 Insert the plug of the AC adaptor into the DC IN 8.4 V jack on the
rear of the photo frame.
1Insert a memory card firmly into the corresponding slot.

The access lamp flashes when the memory card is inserted correctly. Reinsert the memory card after checking the label side of the memory card if the access lamp does not flash.

Note

All memory cards have a back-side and front-side, and an insertion direction. Refer to the following illustration and insert the memory card while you take note of its shape and the appropriate slot.

It may cause malfunction if you insert the card in the wrong direction.
Digital photo frame (1)Stand (1)Card slot cover (1)Connector cover (1)Remote control (1)
AC adaptor (1)AC power cord (1)Operating Instructions (1)Read This First (this manual) (1)Warranty (1)(In some regions, the warranty is not supplied.)
2 Connect the AC power cord to the AC adaptor and the wall outlet.
To the DC IN 8.4 V jack
AC adaptor

Plug

To wall outlet
The status of each memory card is as follows.“Memory Stick” “Memory Stick Duo”CompactFlash card SD memory cardxDPicture Card

We recommend that attach the slot cover supplied with this photo frame when you insert the memory card and leave it inserted for a long time.

2The slideshow of the memory card you inserted starts automatically.
You can enjoy a variety of slideshow styles. ()