35
GB
Using as a printer
Do not bend the print paper, or cut the print paper
from the perforations before printing.
To avoid paper jam or malfunctions of this unit,
make sure of the following before printing:
Do not write or type on the print paper.
Do not attach a sticker or stamps on the print
paper.
When adding print paper to t he paper tray, be
sure that the total number of print paper sheets
does not exceed 20 sheets.
Do not insert different types of print paper
together into the paper tray.
Do not print on used print paper. Printing an
image twice on the same paper will not make
the printed image thicker.
Use the print paper for this unit only.
Do not use print paper ejected without printing.

Notes on storing the print paper

To store print paper in the tray, remove the paper
tray from this unit and close the slide door of the
paper tray.
Avoid storing the paper with the printed faces
touching each other or in contact with rubber or
plastic products, including vinyl chloride or
plasticizer for an extended perio d of time; color
changes or deterioration of the printed image may
occur.
Avoid placing the print paper in a location subject
to high temperatures, high humidity, excessive
dust or direct sunlight.
When you are going to store partially-used print
paper, store it in its original bag or a similar
container.
5Insert the paper tray into this unit.

Before printing

The paper outlet opens automatically when this

unit is placed in the print position (when laid

flat), but you should make sure it is fully open

before printing.

Leave enough room around this unit. The print

paper emerges from the back a few times

during printing. Keep 11 cm (43/8 inches) or

more space at the rear of this unit.

AC Adaptor
Power cord
To the wall
outlet
11 cm (4 3/8
inches) or
more
Movement of print paper