APower indicator

Indicates the power status. Lit: Power on

Off: Power off

BBusy indicator

Indicates the drive status.

Lit: The drive is Writing, Formatting, Reading data, Erasing, Load & Eject.

Blinking: The drive is Playing back an audio CD.

Off: The drive is in a state other than those outlined above.

CEject button

Press to open the disc tray.

DEmergency eject hole

If you cannot open the disc tray with the eject button, turn off the drive, and then insert a thin, elongated object into this hole to eject the disc tray manually.

EDisc tray

Insert discs here, label side up.

Hint

When you insert a disc, use your fingers to press around the center of the disc until it is firmly seated in the drive.

When you remove a disc, lift up on the edge of the disc with your thumb while supporting the center of the disc with your forefinger.

FUSB Connector

Used with a USB cable to connect the drive to a computer.

GDC IN Jack

Connect the supplied AC power cord to the AC power adapter. Connect this assembly to the DC IN jack, and then connect the whole to the AC outlet.

Note

Be sure to use the supplied AC power adapter.

Introduction

7