Preparing the power supply

Charging the battery pack

Your camera operates only with the “InfoLITHIUM” NP-FS11 battery pack* (S series). You cannot use any other battery pack.

Battery pack (S series)

 

CHARGE lamp

To the wall outlet

(mains)

(orange)

 

AC-VF10 AC power adaptor/charger (supplied)

1Connect the AC power adaptor/charger and the wall outlet (mains).

2Insert the battery pack in the direction of the v mark. Slide the battery pack in the direction of the arrow.

The CHARGE lamp lights up when charging begins. When the CHARGE lamp goes off, normal charge is completed. For full charge, which allows you to use the battery longer than usual, leave the battery pack inserted for about one hour after normal charge is completed.

To remove the battery pack

Slide the battery pack in the direction opposite the v mark.

*What is “InfoLITHIUM”?

“InfoLITHIUM” is a lithium ion battery pack which can exchange information such as battery consumption with compatible video equipment. This unit is compatible with the “InfoLITHIUM” battery pack (S series). “InfoLITHIUM” S series battery packs have the

mark. “InfoLITHIUM” is a trademark of Sony Corporation.

started Getting

9