Using the supplied accessories
You can send image data from the camera to an IBM PC/AT compatible PC (via the serial port), using the supplied PC serial cable and Sony PictureGear 3.2 Lite.
Personal computer | Digital still camera |
|
PC serial cable
to the serial port | to the DIGITAL I/O jack |
|
1Install the supplied application software Sony PictureGear 3.2 Lite into the personal computer.
For details, refer to the instruction manual of the Sony PictureGear 3.2 Lite.
2Connect one end of the PC serial cable to the DIGITAL I/O jack, and other end to the serial port of IBM PC/AT compatible PC.
3Turn on the power of the camera, and check that the PC serial cable is connected to the DIGITAL I/O jack of the camera. Set the MODE selector to PLAY.
“PC MODE” appears on the LCD screen, and the camera turns to standby for communication.
4Operate the personal computer to receive and use image file from the camera.
For details on the operation of the personal computer, refer to the instruction manual of personal computer and Sony PictureGear 3.2 Lite.