zAdditional information
Precautions
On Memory Stick
•Do not remove the battery or the AC power adaptor/charger during recording or playback. Always turn off the power before you remove the battery or disconnect the AC power adaptor/charger.
•Do not touch the terminal of the Memory Stick by your hand or a metal object.
•Do not attach any other material than the supplied label on the label space of the Memory Stick.
•Do not strike, bend, or drop the Memory Stick.
•Do not disassemble or convert the Memory Stick.
•Do not wet the Memory Stick.
•Do not use or store the Memory Stick in the following areas:
–Hot locations such as the inside of a car or the outdoors under hot weather.
–Humid or corrosive locations.
•Carry or store the Memory Stick in its supplied case.
•Setting the
•We recommend that you make a backup copy important data.
•Do not remove the Memory Stick while reading or writing data.
•Recorded data may be lost or damaged in the following situations:
–When you remove the Memory Stick or turn off the camera while reading or writing data.
–When you use the Memory Stick in the locations subject to static electricity or noise.
•This camera is not guaranteed to properly play back images shot with other equipment. The images shot with this camera are not guaranteed to be played back properly with other equipment.
On moisture condensation
If the camera is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense inside or outside the camera. Should this occur, the camera will not operate properly. In this case, remove the battery pack and open the battery cover and wait about an hour for the moisture to evaporate.
How to prevent moisture condensation
When bringing the camera from a cold place to a warm place, put the camera in a plastic bag and allow it to adapt to room conditions over a period of time.
1Be sure to tightly seal the plastic bag containing the camera.
2Remove the bag when the air temperature inside it has reached the temperature surrounding it (about an hour).
On cleaning
Cleaning the LCD screen
Wipe the screen surface with the cleaning cloth (not supplied) or a LCD cleaning kit (not supplied) to remove fingerprints, dust, etc.
Cleaning the camera surface
Clean the camera surface with a soft cloth slightly moistened with water. Do not use any type of solvent such as alcohol or benzene as it may mar the finish of the casing.
If you have any questions or problems concerning your camera, please consult your nearest Sony dealer.