Preparation
1Charging the battery pack
To charge the battery pack, use the AC power adaptor/charger.
Your camera operates only with the “InfoLITHIUM” battery pack (S series). “InfoLITHIUM” is a trademark of Sony Corporation.
3
2
1
Preparation
1Insert the battery pack in the direction of the V mark. Slide the battery pack in the direction of the arrow.
2Connect the power cord to the AC power adaptor/charger.
3Connect the power cord to a wall outlet.
The CHARGE lamp (orange) lights up when charging begins.
When the CHARGE lamp goes off, normal charge is completed. For full charge, which allows you to use the battery longer than usual, leave the battery pack attached for about one hour after normal charge is completed.
To remove the battery
pack
Slide the battery pack in the opposite direction of the arrow as illustrated above.
*Charging for about one hour after the CHARGE lamp goes out.
**Charging just until the CHARGE lamp goes out.
For details on battery life, see page 20.
What is “InfoLITHIUM”?
Charging time
Battery Full charge* Normal charge**
85 min. |
Approximate minutes to charge a discharged battery pack using the AC power adaptor/charger
The ”InfoLITHIUM” is a lithium ion battery pack which can exchange data such as battery consumption with compatible video equipment. This unit is compatible with the “InfoLITHIUM” battery pack (S series). Your camera operates only with the “InfoLITHIUM” battery. “InfoLITHIUM” battery packs
have themark. “InfoLITHIUM” is a trademark of Sony Corporation.